click here to advertise with us

Hi Boys and boyett's
I have a 06 STI and I want a splitter. Will one off a blob eye fit?
Or do you know of a good looking one that will fit.

Blob one wont fit - completely different shape.

I had a scott lowe one but they have shut down now i think. HT Autos make a decent one.

As Duncan said ht make them there seem to be well made, only think I would say is if it's anything like the blot eye model u will need to add a few extra nuts and bolts

Scoobyworld are advertising hawkeye front splitters but no change from £400 though

Again as Dunc says HT autos do a nice one, you can get it from there site on ebay :
http://cgi.ebay.co.uk/Hawkeye-Impreza-S ... 483356765a

But be warned they dont like being painted the first one I got from them warped when it was being sprayed, they did sort of replace it, so I kept the second one black, they are well made and fit easily.

photo of our old Hawkeye,

nice flaps.

ginger flaps

Rocket didn't have any flaps Where are you looking?

I have no idea

Im still trying to work out where in that picture is a Hawk eye cos all i can see is a camel toe !!

Look hard and you can see a blue one in the back ground

Is it one of those special pictures where you have to put your face right close to the monitor and then let your eyes focus !! cos if not then either my pc is decieving me or im going short sited !!

I remember a pic like this before, I believe it was scratch and sniff - or atleasts thats what she told me !!

That's definitely a splitter.

You can see why it would warp if you sprayed it.

Thanks all its a ht autos one for me then, And yes she has a nice red splitter.

Got one coming back to me from Revolution Motorsport today. They do 2 versions a plastic type one and also a Carbon Fibre version. I've got the Caron fibre version coming as my STi isn't lowered at all so should still be fine even with the splitter on (he says crossing all fingers and toes).

Just a word of warning if your fitting it yourself. I've sent 2 of these back now because I didnt think either fitted properly. Only a couple of the holes on the splitter lined up properly with the underside of the front bumper and none of the others were even close. Evidentally this is actually the way they are supposed to be, you use the two main lugs towards the front to clip/bolt it into place and then you have to use the self tapping screws that should come with the splitter and screw it into the underside of the bumper to make sure it's firmly held on.

I'm having a go at mine tonight or tomrrow evening, so I'll let you know how it goes !!